First of all, at the operating site of the pressure testing machine, install it according to the existing environment to ensure that the connection and power voltage meet the standards. After the relevant tests are carried out every day, they need to be recorded and submitted to the relevant departments of the enterprise for effective review.

Secondly, before using the pressure testing machine, everyone should carefully read the instruction manual to ensure that they have mastered the basic structure and performance operation of such equipment. When choosing the installation environment, remember to ensure that the equipment is placed smoothly, because it is directly related to the detection effect.

In addition, the inspection work before starting operation should also be in place, especially after a long period of operation, the screws, bolts in the different structures of the pressure testing machine may be loose, detached, and aging. I suggest you find such problems and take effective measures.

It is also necessary to check the hidden dangers and hygienic conditions in the working environment of the pressure testing machine to ensure that the implemented unqualified projects can be effectively rectified, making the entire inspection task more effective and accurate.

In addition, if you want to make your work more efficient, you must constantly guide technicians to learn, and master the entire inspection operation process, to achieve a state of practice and perfection. In addition, cultivate the team's coordination ability and tacit understanding to ensure that the entire inspection operation is carried out in a stable and orderly rhythm.

Valve Test Table

It is very important to do the daily cleaning work of this type of valve test table. During the cleaning and maintenance, relevant technical personnel should also carefully observe whether the working status of the relevant parts of the equipment meets normal standards. If the equipment is found to have abnormal phenomena or hidden dangers, notify professional maintenance personnel to come and deal with it.

Grinder Equipment Supplier to share with you the issues you should pay attention to when using the valve test press.

1.If the oil pump suddenly stops working during the test, the added load should be removed at this time to reduce the oil pressure. After the inspection, restart the oil pump for testing. The oil pump should not be started under high pressure or the cause of the accident should be checked.

Second, if the electrical appliance fails when the testing machine is working, and the start or stop button does not work, the power supply should be cut off immediately to stop the testing machine.

3. It is forbidden for non-operators to operate the machine. All parts of the test machine should be wiped clean frequently and wiped with no spray paint and then wiped with cotton yarn dipped in a small amount of engine oil to prevent rust. When not in use, cover with a dust cover to prevent dust intrusion.

4. After each test, the test bench is lowered and the piston does not fall on the bottom of the cylinder, leaving a little distance for the next use. All valves on the dynamometer should not be placed open to prevent dust from entering the interior and affecting the sensitivity of the measuring mechanism Performance. The oil pump motor should be turned off when the test is suspended.